Calibrated resolution down to 1mV / 0.1mA for sensitive circuits
Engineered for continuous 24/7 full-load industrial duty
Standard USB, RS232, and optional GPIB / LAN interfaces
Supplied by Shenzhen Belmo Technology Co., Ltd. with export packing
Explore our core selection of test equipment manufactured to support comprehensive evaluation of switching power supplies, LED drivers, inverters, and battery management systems.
Programmable and linear regulated DC power sources engineered for low ripple noise, rapid transient recovery time, and ultra-stable voltage/current output across wide operating envelopes.
High-performance DC electronic loads delivering constant current (CC), constant voltage (CV), constant power (CP), and constant resistance (CR) modes for comprehensive power converter qualification and battery stress tests.
Precision multi-parameter digital power analyzers engineered for accurate AC/DC voltage, current, active power, reactive power, power factor, and harmonic distortion measurement under distorted wave conditions.
Consult the core operational specifications below to determine the ideal test apparatus configuration for your technical validation bench or production facility.
| Instrument Category | Operating Modes | Typical Measurement Range | Resolution / Accuracy | Key Applications |
|---|---|---|---|---|
| Programmable DC Power Supply | Constant Voltage (CV), Constant Current (CC), List Cycle | 0–30V, 0–60V, 0–150V / Up to 1200W | 1mV / 0.1mA resolution; ±(0.03% + 5mV) | PCB prototyping, circuit debugging, LED burn-in, automotive electronics powering |
| Programmable DC Electronic Load | CC, CV, CR, CP, Dynamic Transient, Battery Test | 0–150V, 0–500V / Current up to 120A / 300W–3kW | 0.1mV / 0.1mA readback; transient freq up to 25kHz | PSU regulation testing, battery life cycling, DC/DC converter efficiency mapping |
| Multi-Channel Digital Power Meter | AC / DC True RMS, Active/Reactive/Apparent Power | Voltage: 0.5–600V; Current: 5mA–20A direct input | 0.1% of reading accuracy; bandwidth DC to 100kHz | Energy Star verification, IEC 62301 standby analysis, inverter efficiency auditing |
Shenzhen Belmo Technology Co., Ltd. ensures each piece of test apparatus conforms to rigorous international metrology standards before packaging and export dispatch.
Every unit comes pre-tested with documented voltage, current, and wattage readback calibration traceable to national metrology references.
Equipped with internal electromagnetic filtering and isolated output terminals to safeguard both the device under test (DUT) and the testing gear.
Packaged in reinforced protective foam shells and double-wall export cartons to guarantee pristine mechanical integrity during international transit.
Most models support standard RS-232 and USB communication ports, with optional GPIB or Ethernet LAN interfaces available on programmable series. Full SCPI command compatibility enables seamless integration with LabVIEW and automated test benches.
Yes. Every DC power supply, DC electronic load, and digital power meter undergoes rigorous factory multi-point calibration prior to packing, and complete factory test certificates are included inside the package.
Our instruments feature dual-range 110V/220V AC input selector switches or universal 100–240V AC 50/60Hz power supplies, accommodating North American, European, and Asia-Pacific grid voltages without step-down transformers.
The MOQ is 1 unit for evaluation or laboratory replenishment. Standard units are dispatched within 3 to 7 working days via DHL, FedEx, UPS, or sea freight for volume orders.
All test equipment is backed by Shenzhen Belmo Technology Co., Ltd. with a comprehensive 12-month manufacturer hardware warranty, firmware update support, and remote technical support directly from our electrical engineering team.